Remote control
Item no: 000500
Remote control for EASYTHERM and SURETHERM heaters, letting you start and stop heating from a safe distance.
EASYTHERM Series
EASYTHERM 2
For workpieces up to 40 kg
TM Induction Heating · EASYTHERM Series
EASYTHERM 2
EASYTHERM 2 is a portable heater suited to workshop and on-site use for bearings and workpieces up to 40 kg. It offers controlled heating from 0 to 240 °C with a magnetic temperature probe and automatic demagnetising.
Key features
- Temperature mode with magnetic temperature probe (0–240 °C)
- Automatic demagnetising and temperature hold as standard
- Safe heating of sealed, shielded and pre-greased bearings
- Maintenance-free, simple operation
Technical data
| Max. workpiece weight | 40 kg |
|---|---|
| Power rating | 2.99 kVA |
| Voltage | 115 – 230 V |
| Max. current | 13 A |
| Min. bore (vertical) | ø10 mm |
| Max. outer diameter (vertical) | 250 mm |
| Max. outer diameter (horizontal) | 270 mm |
| Max. workpiece width | 120 mm |
| Max. temperature | 240 °C |
| Weight (without yokes) | 14 kg |
| Dimensions (L × W × H) | 200 × 340 × 255 mm |
| Warranty | Max. 24 Months |
TM Induction Heating
EASYTHERM 2 accessories
Original TM yokes, sensors and auxiliary equipment. Contact us for price and availability.
Grease
Item no: 005747
Original TM grease for the yoke contact surfaces of EASYTHERM and SURETHERM heaters, supporting proper yoke seating and efficient heating.
Heat-resistant gloves – max. 240 °C
Item no: 000079
Protective gloves resistant up to 240 °C for safe handling of hot workpieces.
Temperature sensor 240 °C – 500 mm
Item no: 000046
Magnetic temperature sensor with 0.5 m cable for TM induction heaters. Measures up to 240 °C for controlled heating based on actual part temperature.
Set extension yokes 40x50x75 ET
Item no: 005654
Extension yoke set for EASYTHERM 2. Increases the maximum outer diameter the heater can take, allowing larger workpieces to be heated.
Yoke 10x10x200 ET
Item no: 005627
Original TM yoke for EASYTHERM 2, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø15 mm and above.
Yoke 14x14x200 ET
Item no: 005628
Original TM yoke for EASYTHERM 2, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø20 mm and above.
Yoke 25x24x200 ET
Item no: 005629
Original TM yoke for EASYTHERM 2, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø35 mm and above.
Yoke 30x26x200 ET
Item no: 005653
Original TM yoke for EASYTHERM 2, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø40 mm and above.
Yoke 7x7x200 ET
Item no: 005652
Original TM yoke for EASYTHERM 2, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø10 mm and above.
Carrying Case ET2
Item no: 102220-01
Original carrying case for EASYTHERM 2, protecting the unit during field service and transport.
Yoke 40x38x200 ET
Item no: 005630
Original TM yoke for EASYTHERM 2, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø55 mm and above.
EASYTHERM Series
EASYTHERM 1
For workpieces up to 10 kg
EASYTHERM 3.5
For workpieces up to 70 kg
EASYTHERM 15
For workpieces up to 150 kg
EASYTHERM 30
For workpieces up to 300 kg