Remote control
Item no: 000500
Remote control for EASYTHERM and SURETHERM heaters, letting you start and stop heating from a safe distance.
EASYTHERM Series
EASYTHERM 3.5
For workpieces up to 70 kg
TM Induction Heating · EASYTHERM Series
EASYTHERM 3.5
EASYTHERM 3.5 is a workshop heater for mid-size bearings for bearings and workpieces up to 70 kg. It offers controlled heating from 0 to 240 °C with a magnetic temperature probe and automatic demagnetising.
Key features
- Temperature mode with magnetic temperature probe (0–240 °C)
- Automatic demagnetising and temperature hold as standard
- Safe heating of sealed, shielded and pre-greased bearings
- Maintenance-free, simple operation
Technical data
| Max. workpiece weight | 70 kg |
|---|---|
| Power rating | 3.7 kVA |
| Voltage | 115 – 230 V |
| Max. current | 16 A |
| Min. bore (vertical) | ø10 mm |
| Max. outer diameter (vertical) | 360 mm |
| Max. outer diameter (horizontal) | 410 mm |
| Max. workpiece width | 180 mm |
| Max. temperature | 240 °C |
| Weight (without yokes) | 29 kg |
| Dimensions (L × W × H) | 415 × 260 × 340 mm |
| Warranty | Max. 24 Months |
TM Induction Heating
EASYTHERM 3.5 accessories
Original TM yokes, sensors and auxiliary equipment. Contact us for price and availability.
Grease
Item no: 005747
Original TM grease for the yoke contact surfaces of EASYTHERM and SURETHERM heaters, supporting proper yoke seating and efficient heating.
Heat-resistant gloves – max. 240 °C
Item no: 000079
Protective gloves resistant up to 240 °C for safe handling of hot workpieces.
Pivoting Yoke 25x24x280 ET
Item no: 005637
Original TM pivoting yoke for EASYTHERM 3.5. Swings aside for easy loading and unloading of the workpiece. For workpieces with a bore of Ø35 mm and above.
Pivoting Yoke 30x26x280 ET
Item no: 005636
Original TM pivoting yoke for EASYTHERM 3.5. Swings aside for easy loading and unloading of the workpiece. For workpieces with a bore of Ø40 mm and above.
Pivoting Yoke 40x38x280 ET
Item no: 005635
Original TM pivoting yoke for EASYTHERM 3.5. Swings aside for easy loading and unloading of the workpiece. For workpieces with a bore of Ø55 mm and above.
Pivoting Yoke 50x48x280 ET
Item no: 005634
Original TM pivoting yoke for EASYTHERM 3.5. Swings aside for easy loading and unloading of the workpiece. For workpieces with a bore of Ø70 mm and above.
Yoke 10x10x280 ET
Item no: 005633
Original TM yoke for EASYTHERM 3.5, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø15 mm and above.
Yoke 14x14x280 ET
Item no: 005632
Original TM yoke for EASYTHERM 3.5, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø20 mm and above.
Yoke 7x7x280 ET
Item no: 005631
Original TM yoke for EASYTHERM 3.5, for safe and repeatable shrink-fit heating. For workpieces with a bore of Ø10 mm and above.
Set extension yokes 50x50x120 ET
Item no: 005655
Extension yoke set for EASYTHERM 3.5. Increases the maximum outer diameter the heater can take, allowing larger workpieces to be heated. For workpieces with a bore of Ø70 mm and above.
Temperature sensor 240 °C – 1000 mm
Item no: 000542
Magnetic temperature sensor with 1 m cable for TM induction heaters. Measures up to 240 °C for controlled heating based on actual part temperature.
EASYTHERM Series
EASYTHERM 1
For workpieces up to 10 kg
EASYTHERM 2
For workpieces up to 40 kg
EASYTHERM 15
For workpieces up to 150 kg
EASYTHERM 30
For workpieces up to 300 kg